January 06, 2011

Mimi Collection on Facebook



mimiwoo at 16:39|URLComments(1)Information | Doll News

September 07, 2010

ToysField Mini Kuma Bear

【New】ToysField Mini Kuma Bear ~ Autumn Color




mimiwoo at 19:07|URLComments(0)Shop News 

August 30, 2010

New Wallpaper ~ Romantic Night

New Wallpaper ~ Romantic Night. You can download it here:




mimiwoo at 19:03|URLComments(0)Photo Sharing 

July 27, 2010

Pullip exchange to Obitsu 27cm body

1) Choose a Obitsu body in Natural or White skin color to match your Pullip.

2) Take off Pullip's hair (glued wig) carefully. Open Pullip's skull.
Unscrew the screws at the back of Pullip's head, Totally 3 screws.


3) Take out Pullip's original body.


4) For the Obitsu body, use the largest neck attachment. You have to cut the
neck attachment in order to fit into Pullip's Head :

Hard Bust
i) Unscrew the screw located at the top of Obitsu body's neck attachment

ii) Cut the below parts by a sew, making it shorter.
Wrap some elastic tape or rubber band on the neck attachment.

iii) It can place fit onto Pullip head.


Soft Bust
i) Turn around the neck attachment, and it will comes out
from the screw.

ii) Cut the top part by a sew, making it shorter.

iii) Wrap some elastic tape or rubber band on the neck attachment.
It can place fit onto Pullip head.


If you chosen not the keep Pullip's original eyes, then no need to cut the
neck attachments.
i) Take away Pullip's eyes mechanism by uncrewing it.
To install plastic or glasses eye for Pullip, you can refer here.

ii) Wrap some foam tape or elastic tape on the neck attachment, It can
place fit onto Pullip head.



5) After that, close Pullip's head by screw, and Pullip now has a new body!

Hard Bust


Soft Bust





mimiwoo at 19:14|URLComments(0)Information 

July 24, 2010

Hujoo exchange to Obitsu 27cm Body

White skin Obitsu body is most matched with Hujoo's Apricot skin body.
We have chosen a SBH L for Hujoo.
美白Obitsu身, 和Hujoo Apricot的膚色差不多. 這次我們選了SBH大胸.

1) Open the back of Hujoo's head, loose the rubber bands and
take the head out.
把Hujoo的頭蓋打開,橡皮筋鬆開, 把頭拿出來





2) For Obitsu body, Turn around the neck attachment, and it will comes out
from the screw.
把Obitsu身的頸圈螺絲扭出




3) Place Hujoo's head onto Obitsu body.
把Hujoo頭放在Obitsu身體上.


4) Turn around the neck attachment into the screw.
把頸圈扭進螺絲.


5) Turn around the neck attachment untill the head stays good on the body.
Then cover the back head.
把頸圈扭至適中的緊度, 把Hujoo的頭蓋合上.


9) Finished ! Hujoo now has a new Obitsu body.
完成了 ! Hujoo已換上Obitsu的身體








mimiwoo at 00:00|URLComments(2)Information 

July 23, 2010

Install a Dollfie Dream head on Obitsu 50cm Body

The skin color of DD Head is a little bit darker then Obitsu 50cm Head


1) Firstly open the head cap.


2) Pull the head out together with the internal neck attachment tube.


3) Unscrew the screw located inside the neck attachment


4) Unassembly the neck attachment parts.


5) Place the spring part inside DD's head and place the tube outside the
head. Press the spring and screw it at the bottom. This is the most difficult
step.




7) Push the neck attachment tube inside 50cm body's neck


8) Finished ! DD head is now installed on an Obitsu 50cm body.






mimiwoo at 00:01|URLComments(3)Information 

July 22, 2010

Blythe exchange to Obitsu 27cm SBH Body

1) Choose a Obitsu body in Natural or White skin color to match your Blythe.
幫B女選擇個合適膚色的身體


2) Unscrew the screws at the back of Blythe's head, Totally 3 screws.
把頭蓋後面的螺絲鬆開,一共3粒


3) Open Blythe's head carefully by a flat screwer.
螺絲鬆開後,再借助平頭螺絲批小心打開頭蓋


4) Take out Blyhte's original body from her head.
取出B女的身體


5) For the Obitsu body, change to the largest neck attachment.
在Obitsu身體, 選擇最大的頸圈


6) Turn around the neck attachment, and it will comes out from the screw.
把頸圈使螺絲扭出


7) Fix the screw by clip and turn the largest neck attachment into the screw.
用夾子把螺絲固定,把最大的頸圈扭進螺絲.


8) The largest neck attachment is changed.
Obitsu身體已換上最大那個頸圈了


9) Wrap some foam tape or elastic tape on the neck attachment.
在頸位加上厚膠紙或橡皮筋使其緊扣些


10) Place the Obitsu body onto Blythe's head.
放身體上B女頭蓋


11) Close Blythe's head.
把B女頭合上.


12) Screw the 3 screws tightly.
把螺絲上緊


13) Finished ! Blythe now has a new taller body.
完成了 ! B女已換上新的更高的身體


14) Hello, I can make many pose now!
可以自由擺出多種姿態.


mimiwoo at 00:00|URLComments(0)

July 21, 2010

Installing Mimiwoo Plastic Eyes to Hujoo heads

1) Hujoo should use 20mm eye balls.
Eye ball can be purchased at Here!


2) Place the eye putty on the top of eye hole as per photo.
Eye putty can be purchased Here!


3) Push the eye ball to the eye hole


4) Adjust eyeball's position


5) Finished !



mimiwoo at 01:37|URLComments(0)

July 20, 2010

Hujoo exchange to Obitsu 23cm Body

1) 23cm Obitsu body have a similar height to Hujoo's original body.
White skin is most matched with Hujoo's Apricot skin body.
23cm的美白Obitsu身, 和Hujoo Apricot的身高和膚色差不多.


2) Open the back of Hujoo's head, loose the rubber bands and
take the head out.
把Hujoo的頭蓋打開,橡皮筋鬆開, 把頭拿出來





3) For the Obitsu body, Wrap some foam tape or elastic tape on the
neck attachment.
在Obitsu身的頸位加上厚膠紙或橡皮筋


4) Unscrew the screw located at the top of Obitsu body's neck attachment.
鬆開Obitsu身體頸位最頂的螺絲


5) Place Hujoo's head onto Obitsu body.
把Hujoo頭放在Obitsu身體上.


8) Place the neck attachment and screw tightly.
套上頸圈後, 再把嫘絲上緊


9) Wrap more foam tape or elastic tape on the neck attachment.
再在頸位加上厚膠紙或橡皮筋


10) The head stay good on the body. Then cover the back head.


11) Finished ! Hujoo now has a new Obitsu body.
完成了 ! Hujoo已換上Obitsu的身體





mimiwoo at 18:11|URLComments(3)

July 19, 2010

Blythe exchange to Obitsu 23cm Hard Bust Body

1) Choose a Obitsu body in Natural or White skin color to match your Blythe.
23cm Obitsu body have a similar height to Blythe's original body.
幫B女選擇個合適膚色的身體. 選擇了23cm 的 Obitsu 硬胸身, 和原本的身高差不多


2) Unscrew the screws at the back of Blythe's head, Totally 3 screws.
把頭蓋後面的螺絲鬆開,一共3粒


3) Open Blythe's head carefully by a flat screwdriver.
螺絲鬆開後,再借助平頭螺絲批小心打開頭蓋


4) Take out Blythe's original body from her head.
取出B女的身體


5) For the Obitsu body, Unscrew the screw located at the top of the neck
attachment. Change to the largest neck attachment and screw.
在Obitsu身體, 鬆開最頂的螺絲,換上最大那個上頸圈後, 再把螺絲上緊


6) Wrap some foam tape or elastic tape on the neck attachment.
在頸位加上厚膠紙或橡皮筋使其緊扣些


7) Place the Obitsu body onto Blythe's head.
放身體上B女頭蓋.


8) Close Blythe's head and screw tightly.
把B女頭合上, 把螺絲上緊


9) Pull out Obitsu body's hands, belly and lower part.
把Obitsu身體的雙手,胸和腰拉開.


10) Put some foam inside the bust.
放一些海綿進胸內.


11) And put some foam inside the wrist. Then re-assembly the body.
又放一些海綿進腰內. 再把身體合回.


12) Finished ! Blythe now has a new body.
完成了 ! B女已換上新的身體


13) Hello, I can make many pose now!
可以自由擺出多種姿態


mimiwoo at 17:46|URLComments(0)Information